SmartSurfHardware ← Back to SmartSurf

Reservation received.

Reservation {{ orderId }} — {{ confirmProduct }} — is noted at the early-bird total of {{ confirmTotal }}. A manual invoice is on its way to {{ confirmEmail }} — no card was charged today.

Reservation {{ orderId }} locks in today's early-bird price. It's fully refundable until your unit enters production — pay the invoice whenever you're ready.
SmartSurf Tracker
Fifth hardware generation · designed & tested in Hoi An, Vietnam

Know your board and rider are safe

A waterproof, solar-assisted GPS tracker for kite, wing, surf and foil. Set one unit as your Board tracker and another as your Rider tracker — SmartSurf watches both, reads the wind and current around them through Senlay, and tells you the moment a session starts to go wrong. Before it becomes a search.

Mounted across three different boards
Mounted on a twintip
On a hydrofoil
Why a tracker at all

A stopped dot 700 m offshore doesn't tell you whether someone is resting or in trouble. A normal tracker just shows a point — SmartSurf reads the wind, current and drift around that point through Senlay, our physical-world context layer, and reasons about what it means: is this normal, worth watching, or worth acting on.

Board tracker + rider tracker, working together, catch the thing one tracker can't: separation. When the board's motion starts matching the drift vector and the rider isn't moving with it, that's the moment that matters — and it's the moment SmartSurf is built to notice.

Every logged session also feeds AI coaching afterwards — speed, jibes and progression read against the real wind and swell you rode, not empty GPS numbers.

What's inside
  • Epoxy-sealed body — no ports, no buttons, nothing for water to get into
  • Solar-assisted, cellular GPS on a 1NCE lifetime SIM — works without a phone
  • Magnetic switch and mount — assign a unit as Board role or Rider role in seconds
  • Drift detection and board-rider separation alerts, with SOS escalation
  • Adaptive power modes — Live ~7-8h, Active ~10-15h, Eco ~30h, Beacon ~2 days
  • Fleet mode for schools, plus 1 year of SmartSurf Pro included
Specifications
BodyEpoxy-sealed, no ports or buttons
PositioningCellular GPS, 1NCE lifetime SIM
PowerSolar-assisted, adaptive power modes
Live tracking runtime~7–8h
Beacon / recovery mode~2 days
MountMagnetic switch & mount
Connectivity term10 years included
Warranty1 year, manufacturing defects
From riders on the water

"Even experienced riders lose a board — a hard fall in big surf, a strong current, and suddenly it's drifted well out of reach."

— Rider, Maui community


"Our spot gets heavy chop and strong currents. I've come close to losing my board more than once — with gear now costing well over $1,000, being able to see where it drifted would matter a lot."

— Rider, UK community

Early bird · save {{ trkSavings }}

SmartSurf Tracker

{{ trkEarlyPrice }} {{ trkListPrice }}

Early-bird price, locked in now · includes 1 year of Pro


Color
Assign this unit as

Board role and Rider role together unlock separation detection — pick both for the full picture.

Quantity
{{ trkQty }}

{{ duoNote }}

Secure payment with PayPal on the next step Refundable until production
SmartSurf Board
Shaped with Shaper · tracker embedded at the factory

The tracker is part of the board

Built by our in-house Shaper alongside a SmartSurf Tracker laminated permanently into the tail — nothing to clip on, nothing to lose, always paired to your account.

Why embed it instead of clipping one on

A clip-on tracker only logs a session if you remembered to bring it and clip it on. An embedded one can't be forgotten, can't fall off mid-jump, and can't end up on the wrong board at a busy spot — it's simply part of this board, every time it touches water. Pair it with a rider Tracker and SmartSurf gets board-separation context for free: no extra setup.

Buy the standalone Tracker if you swap it between boards and a foil. Buy the Board if you want one piece of gear that logs itself, no setup, every session, automatically.
What's inside
  • SmartSurf Tracker laminated into the tail — permanent, never swapped, never lost
  • Solar trickle charging through the deck laminate
  • Every session logged and matched to wind, swell and your Rider Profile automatically
  • Shaped to your size, volume and riding style — one board, one shaper
Specifications
ConstructionHand-shaped, tracker laminated into deck
ShapesShortboard, Fish, Midlength, Longboard, Gun
Made to orderCustom length & volume
Tracker roleBoard-separation context, paired
Lead timeShaped to order after reservation
Warranty1 year, manufacturing defects
Early bird · save {{ brdSavings }}

SmartSurf Board

{{ brdEarlyPrice }} {{ brdListPrice }}

Price scales with size and volume · shaped to order


Shape
Length
{{ brdLenText }}
Volume
{{ brdVol }} L

Early-bird price paid in full to secure your shaping slot with our in-house Shaper. Indicative pricing — final quote confirmed after your shape is set.

No card details collected here Deposit refundable pre-shape
{{ stickyPrice }}{{ stickyWas }}
We're a small team building this in the open

Contact & Support

Questions about a preorder, an existing reservation, or the hardware itself — this is where they go.

Email smartsurfsolar@gmail.com Replies within 1 business day
Reservation questions Include your reservation ID e.g. SS-48213 — from your confirmation screen
Built in Hoi An, Vietnam Every prototype tested where it's used
Frequently asked

Will my card be charged today?

No. Reserving sends you an emailed invoice for the early-bird total. Nothing is collected on this page — no card fields, no automatic charge.


Is the deposit / early-bird price refundable?

Yes, in full, any time before your Tracker enters production or your Board goes into shaping. Email us with your reservation ID.


What's the difference between the Tracker and the Board?

The Tracker is a standalone unit you move between gear — assign it Board role or Rider role. The Board has a Tracker sealed permanently into the deck at the factory, paired for board-separation context automatically.


Does the Tracker work without a phone nearby?

Yes — it reports over its own cellular connection (a 1NCE lifetime SIM built in), independent of any paired phone.


When does my unit ship?

Hardware ships in small batches as production runs complete; boards ship after shaping. We email every reservation holder with a firm window before charging the remaining balance, if any.

Shipping & returns
Reservation refundsFull refund pre-production
Shipping regionsWorldwide, coverage-dependent for cellular
Warranty1 year hardware, manufacturing defects
Connectivity term10-year 1NCE SIM, included